Sorry, you need to enable JavaScript to visit this website.

Debian/Linaro on Ultrazed, X11 does not start

Unsolved
3 posts / 0 new
vcouvert's picture
vcouvert
Junior(0)
Debian/Linaro on Ultrazed, X11 does not start

Hello,
 
When trying to migrate from my Petalinux rootfs to a Debian (downloaded from Linaro), X11 no more starts on my UltraZed. Any ideas?
 
Here is the Xorg.0.log
[ 16.617] (II) Loader magic: 0x55710a2d70
[ 16.617] (II) Module ABI versions:
[ 16.617] X.Org ANSI C Emulation: 0.4
[ 16.617] X.Org Video Driver: 19.0
[ 16.617] X.Org XInput driver : 21.0
[ 16.617] X.Org Server Extension : 9.0
[ 16.621] (EE) systemd-logind: failed to get session: PID 4522 does not belon
g to any known session
[ 16.624] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 16.625] (II) no primary bus or device found
[ 16.625] falling back to /sys/devices/platform/amba/amba:xilinx_drm/drm/c
ard0
[ 16.625] (II) "glx" will be loaded by default.
[ 16.625] (II) LoadModule: "glx"
[ 16.625] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 16.631] (II) Module glx: vendor="X.Org Foundation"
[ 16.631] compiled for 1.17.3, module version = 1.0.0
[ 16.631] ABI class: X.Org Server Extension, version 9.0
[ 16.631] (==) AIGLX enabled
[ 16.631] (II) LoadModule: "armsoc"
[ 16.631] (II) Loading /usr/lib/xorg/modules/drivers/armsoc_drv.so
[ 16.632] (II) Module armsoc: vendor="X.Org Foundation"
[ 16.632] compiled for 1.17.3, module version = 1.4.0
[ 16.632] Module class: X.Org Video Driver
[ 16.632] ABI class: X.Org Video Driver, version 19.0
[ 16.632] (II) ARMSOC: Driver for ARM Mali compatible chipsets
[ 16.632] (++) using VT number 7
[ 16.632] (WW) Falling back to old probe method for armsoc
[ 16.632] (II) No BusID or DriverName specified - opening /dev/dri/card0
[ 16.632] (II) Got BusID
[ 16.632] (II) Opened DRM
[ 16.633] (II) DeviceName is [/dev/dri/card0]
[ 16.633] (II) bus_id is []
[ 16.633] (II) DriverName is [xilinx_drm]
[ 16.633] (II) version is [1.0.0]
[ 16.633] (II) Screen:0, CRTC:-1
[ 16.633] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 16.633] (II) ARMSOC(0): Creating default Display subsection in Screen secti
on
"Default Screen Section" for depth/fbbpp 24/32
[ 16.633] (==) ARMSOC(0): Depth 24, (==) framebuffer bpp 32
[ 16.633] (==) ARMSOC(0): RGB weight 888
[ 16.633] (==) ARMSOC(0): Using gamma correction (1.0, 1.0, 1.0)
[ 16.633] (==) ARMSOC(0): Default visual is TrueColor
[ 16.633] (II) No BusID or DriverName specified - opening /dev/dri/card0
[ 16.633] (II) Got BusID
[ 16.633] (II) Opened DRM
[ 16.633] (II) DeviceName is [/dev/dri/card0]
[ 16.633] (II) bus_id is []
[ 16.633] (II) DriverName is [xilinx_drm]
[ 16.633] (II) version is [1.0.0]
[ 16.634] (II) UnloadModule: "armsoc"
[ 16.634] (EE) Screen(s) found, but none have a usable configuration.
[ 16.634] (EE)
Fatal server error:
[ 16.634] (EE) no screens found(EE)
[ 16.634] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 16.634] (EE) Please also check the log file at "/var/log/Xorg.0.log" for ad
ditional information.
[ 16.634] (EE)
[ 16.654] (EE) Server terminated with error (1). Closing log file.
 
Thanks for your help.

 

zedhed's picture
zedhed
Moderator(25)
RE: Debian/Linaro on Ultrazed, X11 does not start

Hi vcouvert,

What changes when you migrate from your Petalinux rootfs to a Debian build?

Do you change your HW platform (from Vivado) or your device tree (from PetaLinux) at all?

Best Regards,

-Kevin

vcouvert's picture
vcouvert
Junior(0)
Hi zedhed,

Hi zedhed,
Thanks for your answer.
I did not change anything in the HW platform and I just removed the PCI support in the kernel (as explained here: http://www.wiki.xilinx.com/Zynq+UltraScale%EF%BC%8B+MPSoC+Ubuntu+part+2+...).
I also tried with the roofs from the image given on this Wiki page (Ubuntu_Desktop_Release_2017_1.zip) and I see the mouse cursor displayed on my screen for a few seconds (I can even move it using the mouse) a nd then it disappear...
Vincent