Sorry, you need to enable JavaScript to visit this website.

ethernet with pulsar linux

Solved
3 posts / 0 new
scottp00's picture
scottp00
Junior(0)
ethernet with pulsar linux

Hi.    I'm running pulsar linux 8 on a Z7010 board.   When I generate a new BOOT file, linux shows the ethernet interface is always down.  If I use the original BOOT file, it functions normally.   I am using Vivado/SDK 20717.2 to generate.   I also noticed that when using the default BOOT file, linux sees the ethernet driver as a Marvel88E1510 but under the new file it shows Generic PHY.   Any help would be appreciated.   Thanks

HannahBurh12's picture
HannahBurh12
Junior(0)
Have you tried plugging in

Have you tried plugging in the Ethernet while generating a new boot file? I had a similar issue not so long time ago, will try to check how I fixed it.
Regards,
Han

scottp00's picture
scottp00
Junior(0)
I found a fix for this.  Use

I found a fix for this.  Use the provided FSBL file instead of generating one in the SDK
http://zedboard.org/sites/default/files/design/MZ_IIoT_HW_Tutorial_VIV20...