Sorry, you need to enable JavaScript to visit this website.

Memory Interface Generator on XZ7100?

Zedboard forums is currently read-only while it under goes maintenance.

Solved
4 posts / 0 new
gaochangw
Junior(0)
Memory Interface Generator on XZ7100?

Hi,
 
We are considering design an accelerator that make use of the Xilinx DDR controller IP so that the PL can access DRAM directly without AXI-DMA; however we just found from the manual that the DDR interface on Zynq MMP is connected to Bank 502, which is only connected to the PS. Is it possible to use the Memory Interface Generator on Zynq MMP XZ7100? Thanks a lot!
 
Best,
Chang

npoureh
Moderator(4)
The DDR3 on the Zynq MMP uses

The DDR3 on the Zynq MMP uses the PS hard IP memory controller and cannot be used with a PL based MIG design. If you need DDR3 connected to the PL, you may want to take a look at Avnet Zynq Mini-ITX platform www.zedboard.org/product/mini-itx-board.

gaochangw
Junior(0)
Considering buying one

Hi,
I wonder what the difference between these items?
AES-MINI-ITX-7Z100-G
AES-MINI-ITX-7Z100-SYS-G
AES-MINI-ITX-7Z100-BAS-G
 
Does AES-MINI-ITX-7Z100-G include a power module and necessary accessories to be ready to use out of box? Thank you!

npoureh
Moderator(4)
1) The AES-MINI-ITX-7Z100-G

1) The AES-MINI-ITX-7Z100-G consists of  the board + power module, but not the ATX power supply.

2) The AES-MINI-ITX-7Z100-BAS-G consists of the board, power module, and the ATX power supply (ready to be used out of box).

3) The AES-MINI-ITX-7Z100-SYS-G consists of the board, power module, and the ATX power supply in a MIni-ITX chassis.