Sorry, you need to enable JavaScript to visit this website.

UltraZed-EG out-of-the-box Ethernet

Solved
4 posts / 0 new
tayloral's picture
tayloral
Junior(0)
UltraZed-EG out-of-the-box Ethernet

Hi, 
I'm testing out some things on a new board, but am having an issue with Ethernet.
On both the original SD image and one I made, the Ethernet adapter reports not ready and fails to find a configuration from " Sending discover..." (DHCP server is preset on LAN).  From the video about the starter kit, it seems that it should.  
Before I go to far into trying to fix this, am I correct in thinking this should work?
Thanks

npoureh's picture
npoureh
Moderator(3)
Make sure you are connected

Make sure you are connected to a GigE port. Please see the Xilinx answer record at https://www.xilinx.com/support/answers/66553.html.

 

tayloral's picture
tayloral
Junior(0)
Perfect, that was it.  Thanks

Perfect, that was it.  Thanks.
Do you know if there are plans to provide a pre-built image with  > 2016.2 (assuming dynamic switching was added)?  Our LAN is 100M and direct connection is sort of impractical.

npoureh's picture
npoureh
Moderator(3)
Good to hear it worked for

Good to hear it worked for you.

We most likely won't be updating the Out-of-Box design to the later version of Vivado (then again, we might), however, look for future reference designs posted on our web site for Vivado 2017.x which will support other Etherent rates. These reference designs are usually posted with a pre-build image as well.