Sorry, you need to enable JavaScript to visit this website.

Unable to open the file

Unsolved
3 posts / 0 new
Szeyong's picture
Szeyong
Junior(0)
Unable to open the file

Hi, we have faced some problems when we tried to open the files in vivado software. The hardware we are using is  ZYNQ XC72Z020 CLG400ABX1601 D5170858A
The error is stated below. 
 
ERROR: [Board 49-71] The board_part definition was not found for em.avnet.com:microzed_7020:part0:1.1. The project's board_part property was not set, but the project's part property was set to xc7z020clg400-1. Valid board_part values can be retrieved with the 'get_board_parts' Tcl command. Check if board.repoPaths parameter is set and the board_part is installed from the tcl app store.
 
Any possible solution is appreciated. Thank You!

Szeyong's picture
Szeyong
Junior(0)
The code we have tried to use

We tried to followed the instructions given. However, we are unable to open the folder
 
cd D:/FYP_FPGA/AES-MBCC-EMBV-DEV-G_PYTHON1300C_HLS_2015_4_01/embv_hls_2015_4_01/embv_hls/embv/hardware/vivado
source ./scripts/create_project.tcl
# set project_dir "project"
# set ip_dir "srcs/ip"
# set hdl_dir "srcs/hdl"
# set ui_dir "srcs/ui"
# set constrs_dir "constrs"
# set scripts_dir "scripts"
# if { $argc > 1 } {
#    puts "ERROR: Specify target platform: '-tclargs embv'
#    exit
# }
# if { $argc == 0 || $argv eq "embv" } {
#    set platform "embv"
#    set part "xc7z020clg400-1"
#    set board_part "em.avnet.com:microzed_7020:part0:1.1"
# } else {
#    puts "ERROR: Incorrect or unknown target platform selected: '$argv'"
#    exit
# }
# puts "INFO: Target platform selected: '$platform'"
INFO: Target platform selected: 'embv'
# set design_name "embv_top"
# set pin_xdc_file "pin_${platform}.xdc"
# set timing_xdc_file "timing_${platform}.xdc"
# set ps7_config_file "ps7_config_${platform}.tcl"
# create_project $design_name $project_dir -part $part -force
INFO: [ProjectBase 1-489] The host OS only allows 260 characters in a normal path. The project is stored in a path with more than 80 characters. If you experience issues with IP, Block Designs, or files not being found, please consider moving the project to a location with a shorter path. Alternately consider using the OS subst command to map part of the path to a drive letter.
Current project path is 'D:/FYP_FPGA/AES-MBCC-EMBV-DEV-G_PYTHON1300C_HLS_2015_4_01/embv_hls_2015_4_01/embv_hls/embv/hardware/vivado/project'
INFO: [IP_Flow 19-234] Refreshing IP repositories
INFO: [IP_Flow 19-1704] No user IP repositories specified
INFO: [IP_Flow 19-2313] Loaded Vivado IP repository 'C:/Xilinx/Vivado/2016.4/data/ip'.
# set_property board_part $board_part [current_project]
ERROR: [Board 49-71] The board_part definition was not found for em.avnet.com:microzed_7020:part0:1.1. The project's board_part property was not set, but the project's part property was set to xc7z020clg400-1. Valid board_part values can be retrieved with the 'get_board_parts' Tcl command. Check if board.repoPaths parameter is set and the board_part is installed from the tcl app store.

JFoster's picture
JFoster
Moderator(55)
Hi,

Hi,

Are you using a MicroZed 7020? It looks like you did not install the board definition file associated with your MicroZed.

You can find the board definition files along with installation instructions located here http://zedboard.org/support/documentation/1519

--Josh