Sorry, you need to enable JavaScript to visit this website.

The following reference designs are provided “AS IS”. If you have questions, please utilize the on-line forums in seeking help.

Downloads

(Requires Login)

FMC-HDMI-CAM + PYTHON-1300-C Reference Design Tutorial

IP Cores are provided for the FMC-HDMI-CAM module’s video interfaces (HDMI input, HDMI output), as well as the PYTHON-1300-C camera receiver.  The tutorials instruct the user how to build a design with Vivado Design Suite (IP Integrator and SDK). Required hardware includes: ZedBoard or MicroZed 7020 SOM + FMC Carrier Card or PicoZed 7030 SOM + PicoZed FMC Carrier V2, FMC-HDMI-CAM module, and optionally the PYTHON-1300-C camera module.

 

FMC-HDMI-CAM + PYTHON-1300-C Getting Started Design, Vivado 2014.4
FMC-HDMI-CAM + PYTHON-1300-C Getting Started Design, Vivado 2015.2
FMC-HDMI-CAM + PYTHON-1300-C Getting Started Design, Vivado 2015.4

FMC Carrier Card Linux User IO Tutorial

This tutorial interfaces the Zynq processing system (PS) through routing resources inside the programmable logic (PL). A Linux application controls the blink pattern and rate of the four LEDs on the FMC-CC. This is done with the built-in PS GPIO controller. The LEDs are controlled by input through the two push buttons. This is the tutorial referred to in the Quick Start Instructions and the Getting Started Guide.

Vivado 2013.3 Version

FMC-IMAGEON IP Cores and Tutorials for Vivado

Three IP Cores are provided for the FMC-IMAGEON module’s video interfaces (VITA receiver, HDMI input, HDMI output).  The tutorials instruct the user how to build a design with Vivado Design Suite (IP Integrator and SDK). Required hardware includes: ZedBoard or MicroZed 7020 SOM + FMC Carrier Card, FMC-IMAGEON module, or FMC-IMAGEON with VITA camera

 

FMC-IMAGEON + VITA Getting Started Design, Vivado 2014.4
FMC-IMAGEON + VITA Getting Started Design, Vivado 2015.2
FMC-IMAGEON + VITA Getting Started Design, Vivado 2015.4